Removing an EMC Symmetrix System from the SMI-S Provider

Objective

To reduce the SMI-S provider workload and therefore improve performance, it is recommended to remove some EMC systems from the SMI-S provider. This action can be performed with the remsys command.

Pre-requisites

The “remsys” command requires SMI-S 4.3.x or later.

Procedure

1. Log into the server where the SMI-S Provider is installed.
2. Open a command prompt.
3. Change directory to: C:\Program Files\EMC\ECIM\ECOM\bin (where C:\ is the ECIM install drive).
4. Type TestSmiProvider to launch the utility.
5. Login with an Admin username and password.
6. Type “ein” to enumerate instance names.
7. Type the class value “Symm_StorageSystem”. The utility should produce an output similar to the following:

   ++++ Testing EnumerationInstanceNames: Symm_StorageSystem ++++
   Instance 0:
   Symm_StorageSystem.CreationClassName="Symm_StorageSystem",Name="SYMMETRIX+0001949xxxxx"Instance 1:
   Symm_StorageSystem.CreationClassName="Symm_StorageSystem",Name="SYMMETRIX+0001949xxxxx”

8. Copy the entire path of the array that you wish to remove
   Example: Symm_StorageSystem.CreationClassName="Symm_StorageSystem",Name="SYMMETRIX+0001949xxxxx"
9. Append the EMC Symmetrix path to WBEM server path.
   Example: //11.1.11.111/root/emc:Symm_StorageSystem.CreationClassName="Symm_StorageSystem",Name="SYMMETRIX+0001949xxxxx"
10. Type “remsys”.
11. Type “Y” to confirm.
12. Paste the new object path at the Systems ObjectPath prompt.
13. Type “Y” to confirm.

The EMC Symmetrix array should now be removed. You can run a “dv” command to verify the system has actually been removed.

Related Topics

• Removing an EMC CLARiiON System from the SMI-S Provider
• Verifying that Every EMC Disk Arrays are Properly Attached to an EMC SMI-S Provider
• Preventing the Automatic Discovery of EMC Symmetrix Arrays
• How to Rebuild the SYMAPI Database in the EMC SMI-S Provider
• How to Monitor Dell EMC VMAX/PowerMax Storage Systems with Storage Analyzer KM