KB1231: Monitoring Dell EMC Avamar Appliances using Monitoring Studio KM | Knowledge Base

Downloads

3.0KB

Introduction

This article explains how to import the pre-built configuration into Monitoring Studio to monitor Dell EMC Avamar Appliances through SNMP.

Important Note:This pre-built configuration does not cover all the monitoring aspects of a Dell EMC Avamar appliance. It is provided as an example and can be used as a working base for advanced monitoring. No support will be provided for this pre-built configuration. Should you need further assistance to customize it, please contact our Professional Services team.

Monitored Parameters

The pre-built configuration collects the following metrics:

Metrics collected for the Dell EMC Avamar appliance

Burm Last Activity
- Activity Error Code (Threshold to be set by the user)
- Activity Status Code (Threshold to be set by the user)
- Activity Type
- Client Name
DPN
- Active Sessions
- Data Protected MB (Threshold to be set by the user)
- Free Mega Bytes
- Server Status
- Storage Used Percentage
Scheduler
- Scheduler Status

Importing the Pre-Built Configuration

Pre-requisites

Before using the pre-built configuration, make sure that:

a supported version of the PATROL Agent is installed and properly configured,
Monitoring Studio KM 9.4.02 or higher is installed with the latest patches and loaded on the PATROL Agent
You have access to the SNMP Agent running on the Avamar appliance through SNMP v1, v2c, or v3.

Procedure

Download the configuration file, unzip and copy it on the server where the PATROL Agent is installed and loaded with the Monitoring Studio KM.
Right-click on the main Monitoring Studio icon > KM Commands > Configuration > Import Configuration…
Locate the folder where the downloaded .cfg file is saved and select the Dell EMC Avamar configuration file.
Monitoring Studio indicates the number of hosts found in the configuration file that require specific information before being imported. You can click the Hosts button to view the list. Click Next.
Provide the hostname or IP address of the Dell EMC Avamar appliance to be monitored and click Next.
Specify the system credentials (optional) and the SNMP version you wish to use and click Next.

Note: For SNMP v1 and v2c, provide the SNMP community string; for SNMP v3 enter the credentials.
Review the Import Summary and click Next.
Click Finish.

Note: Thresholds are not set by default. We recommend you set them according to your specific requirements.

Learn More

To learn more about the Monitors used in this configuration template, please refer to the Specifying the Monitors Used section of the user documentation.

Please refer to Professional Services page to learn more about the consulting services available.

Monitoring Dell EMC Avamar Appliances using Monitoring Studio KM